Good Contents Are Everywhere, But Here, We Deliver The Best of The Best.Please Hold on!
POSTS PORTFOLIO SEARCH SHOP
PORTFOLIO
SEARCH
SHOP
  • Your Cart Is Empty!
  • +971 52 849 3496
  • +1 512 808 5399
  • +91 988 534 4596
  • +966 54 602 9364
  • +61 420768137

Oracle Database Appliance : Monitor Hardware Components

By on

July 18, 2018

- Uncategorized

Oracle Database Appliance (ODA) is an entry level Engineered System. ODA is a pre-configured, highly available Oracle Database Engineered system. ODA system consists of hardware, software, storage and networking. The hardware configuration is designed to provide redundancy and protection against single points of failures in the system.

 ODA consists of two physical servers (Node 0 and Node 1), a storage shelf and optionally an additional storage shelf. The two independent physical servers are interconnected and direct attached to SAS and SSD storage.

 ODA is basically a 2-node RAC cluster database system running Oracle Linux operating (OEL), Oracle Database Enterprise Edition, Oracle Grid Infrastructure (Clusterware and ASM). All these together provides the Oracle Database high availability running on ODA.

 ODA consists of several hardware components such as Mother Board, Processor, Memory, Power Supply, FAN, Network cards and so on. You can monitor the hardware status of these components using OAKCLI command for both Bare Metal and Virtualized platform.

 Note: ODACLI is used for Hardware monitoring and administrative tasks on the Oracle Database Appliance on X6-2 S/M/L & X7-2 S/M.


 In this article we will demonstrate how to monitor different hardware component status on ODA nodes.

 Using OAKCLI command to Get Hardware Status
  • Execute the following command to display ODA server details

[root@odanoden1 ~]# oakcli show server

         Power State              : On
        Open Problems            : 0
        Model                    : ODA X4-2
        Type                     : Rack Mount
        Part Number              : 33060862+1+1
        Serial Number            : 1440XXXXXX
        Primary OS               : Not Available
        ILOM Address             : 10.10.20.1
        ILOM MAC Address         : 00:10:E0:62:3F:F6
        Description              : Oracle Database Appliance X4-2 1440XXXXX
        Locator Light            : Off
        Actual Power Consumption : 261 watts
        Ambient Temperature      : 18.500 degree C
        Open Problems Report     : System is healthy

 [root@odanoden2 ~]# oakcli show server

         Power State              : On
        Open Problems            : 0
        Model                    : ODA X4-2
        Type                     : Rack Mount
        Part Number              : 33060862+1+1
        Serial Number            : 1440XXXXXX
        Primary OS               : Not Available
        ILOM Address             : 10.10.20.2
        ILOM MAC Address         : 00:10:E0:62:41:D6
        Description              : Oracle Database Appliance X4-2 1440XXXXX
        Locator Light            : Off
        Actual Power Consumption : 269 watts
        Ambient Temperature      : 17.750 degree C
        Open Problems Report     : System is healthy
  • Execute the following command to display ODA model

[root@odanoden1 ~]# oakcli show env_hw
BM ODA X4-2
Public interface : COPPER
  • Execute the following command to display ODA software version details

[root@odanoden1 ~]# oakcli show version -detail
Reading the metadata. It takes a while…
System Version  Component Name            Installed Version         Supported Version
————–  —————           ——————        —————–
12.1.2.10.0
                Controller_INT            11.05.03.00               Up-to-date
                Controller_EXT            11.05.03.00               Up-to-date
                Expander                  0018                      Up-to-date
                SSD_SHARED                944A                      Up-to-date
                HDD_LOCAL                 A72A                      Up-to-date
                HDD_SHARED                A72A                      Up-to-date
                ILOM                      3.2.8.25 r114493          Up-to-date
                BIOS                      25040100                  Up-to-date
                IPMI                      1.8.12.4                  Up-to-date
                HMP                       2.3.5.2.8                 Up-to-date
                OAK                       12.1.2.10.0               Up-to-date
                OL                        6.8                       Up-to-date
                GI_HOME                   12.1.0.2.170117(2473      Up-to-date
                                          2082,24828633)
                DB_HOME                   12.1.0.2.170117(2473      Up-to-date
                                          2082,24828633)
  • Execute the following command to display ‘oakcli show’ help

[root@odanoden1 ~]# oakcli show -h
Usage:
oakcli show {disk|diskgroup|expander|fs|raidsycstatus|controller|server|processor|memory|power|cooling|network|enclosure|storage|core_config_key|version|dbhomes|dbstorage|databases|db_config_params|asr|env_hw} [<options>]
where:
        disk                     – About the disk
        diskgroup                – ASM disk group
        expander                 – Expander
        fs                       – Filesystem
        controller               – Controller
        storage                  – All storage components
        version                  – Running software version
        dbhomes                  – Installed oracle database homes
        dbstorage                – Details of ACFS storage setup for the databases
        databases                – Database names
        db_config_params         – db_config_params file
        asr                      – ASR configuration
        env_hw                   – Environment and Hardware information
        server                   – Details of server sub-system
        processor                – Details of processor sub-system
        memory                   – Details of memory sub-system
        power                    – Details of power supply sub-system
        cooling                  – Details of cooling sub-system
        network                  – Details of network sub-system
        enclosure                – Details of enclosure sub-system
        raidsyncstatus           – RAID sync status information
        core_config_key          – Core configuration
For detailed help on each command and object and its options use:
oakcli <command> <object> -h
  • Execute the following command to monitor the Processor Status

[root@odanoden1 ~]# oakcli show processor

         NAME  HEALTH HEALTH_DETAILS PART_NO. LOCATION   MODEL                         MAX_CLK_SPEED TOTAL_CORES ENABLED_CORES

         CPU_0 OK     –              060E     P0 (CPU 0) Intel(R) Xeon(R) CPU E5-2697  2.700 GHz       12        NA
        CPU_1 OK     –              060E     P1 (CPU 1) Intel(R) Xeon(R) CPU E5-2697  2.700 GHz       12        NA
  • Execute the following command to monitor the Memory Status

[root@odanoden1 ~]# oakcli show memory

         NAME    HEALTH HEALTH_DETAILS PART_NO.         SERIAL_NO.         LOCATION MANUFACTURER MEMORY_SIZE CURR_CLK_SPEED ECC_Errors

         DIMM_0  OK     –              M393B2G70DB0-YK0 00CE03143317593248 P0/D0    Samsung      16 GB       1600 MHz       0
        DIMM_1  OK     –              M393B2G70DB0-YK0 00CE0314331759238B P0/D1    Samsung      16 GB       1600 MHz       0
        DIMM_10 OK     –              M393B2G70DB0-YK0 00CE031433175926CD P1/D2    Samsung      16 GB       1600 MHz       0
        DIMM_11 OK     –              M393B2G70DB0-YK0 00CE031433175927AD P1/D3    Samsung      16 GB       1600 MHz       0
        DIMM_12 OK     –              M393B2G70DB0-YK0 00CE031433175922C3 P1/D4    Samsung      16 GB       1600 MHz       0
        DIMM_13 OK     –              M393B2G70DB0-YK0 00CE03143317593250 P1/D5    Samsung      16 GB       1600 MHz       0
        DIMM_14 OK     –              M393B2G70DB0-YK0 00CE0314331759367A P1/D6    Samsung      16 GB       1600 MHz       0
        DIMM_15 OK     –              M393B2G70DB0-YK0 00CE03143317593319 P1/D7    Samsung      16 GB       1600 MHz       0
        DIMM_2  OK     –              M393B2G70DB0-YK0 00CE031433175927A8 P0/D2    Samsung      16 GB       1600 MHz       0
        DIMM_3  OK     –              M393B2G70DB0-YK0 00CE03143317592B31 P0/D3    Samsung      16 GB       1600 MHz       0
        DIMM_4  OK     –              M393B2G70DB0-YK0 00CE03143317592B35 P0/D4    Samsung      16 GB       1600 MHz       0
        DIMM_5  OK     –              M393B2G70DB0-YK0 00CE03143317591C3C P0/D5    Samsung      16 GB       1600 MHz       0
        DIMM_6  OK     –              M393B2G70DB0-YK0 00CE031433175922C7 P0/D6    Samsung      16 GB       1600 MHz       0
        DIMM_7  OK     –              M393B2G70DB0-YK0 00CE0314331759324E P0/D7    Samsung      16 GB       1600 MHz       0
        DIMM_8  OK     –              M393B2G70DB0-YK0 00CE0314331759324B P1/D0    Samsung      16 GB       1600 MHz       0
        DIMM_9  OK     –              M393B2G70DB0-YK0 00CE0314331759331A P1/D1    Samsung      16 GB       1600 MHz       0
  • Execute the following command to monitor Power Status

[root@odanoden1 ~]# oakcli show power

         NAME            HEALTH HEALTH_DETAILS PART_NO. SERIAL_NO.         LOCATION INPUT_POWER OUTPUT_POWER INLET_TEMP     EXHAUST_TEMP

         Power_Supply_0  OK     –              7079395  476856Z+1435CE00EU PS0      Present     119 watts    32.250 degree C 36.562 degree C
        Power_Supply_1  OK     –              7079395  476856Z+1435CE00F6 PS1      Present     112 watts    37.000 degree C 40.375 degree C
  • Execute the following command to monitor Network Status

[root@odanoden1 ~]# oakcli show network

         NAME           HEALTH HEALTH_DETAILS LOCATION PART_NO MANUFACTURER MAC_ADDRESS        LINK_DETECTED DIE_TEMP

         Ethernet_NIC_0 OK     –              NET0     X540    INTEL        00:10:E0:62:3F:F2  yes (eth2)    46.250 degree C
        Ethernet_NIC_1 OK     –              NET1     X540    INTEL        00:10:E0:62:3F:F3  no (eth3)     46.250 degree C
        Ethernet_NIC_2 OK     –              NET2     X540    INTEL        00:10:E0:62:3F:F4  no (eth4)     51.000 degree C
        Ethernet_NIC_3 OK     –              NET3     X540    INTEL        00:10:E0:62:3F:F5  no (eth5)     51.500 degree C
        Ethernet_NIC_4 –      –              NET4     X540    INTEL        90:E2:BA:81:2B:B4  yes (eth0)    –
        Ethernet_NIC_5 –      –              NET5     X540    INTEL        90:E2:BA:81:2B:B5  yes (eth1)    –
  • Execute the following command to monitor Storage Status

[root@odanoden1 ~]# oakcli show storage
==== BEGIN STORAGE DUMP ========
Host Description: Oracle Corporation:SUN SERVER X4-2
Total number of controllers: 3
        Id         = 1
        Serial Num = 500605b008030030
        Vendor     = LSI Logic
        Model      = SGX-SAS6-EXT-Z
        FwVers     = 11.05.03.00
        strId      = mpt2sas:30:00.0

         Id         = 2
        Serial Num = 500605b00802fbc0
        Vendor     = LSI Logic
        Model      = SGX-SAS6-EXT-Z
        FwVers     = 11.05.03.00
        strId      = mpt2sas:40:00.0

         Id         = 0
        Serial Num = 500605b008071240
        Vendor     = LSI Logic
        Model      = SGX-SAS6-INT-Z
        FwVers     = 11.05.03.00
        strId      = mpt2sas:50:00.0

 Total number of expanders: 2
        Id         = 1
        Serial Num = 50800200019f0002
        Vendor     = ORACLE
        Model      = DE2-24P
        FwVers     = 0018
        strId      = Primary
        WWN        = 5080020001a6b97e

         Id         = 0
        Serial Num = 50800200019f0002
        Vendor     = ORACLE
        Model      = DE2-24P
        FwVers     = 0018
        strId      = Secondary
        WWN        = 5080020001a6babe

 Total number of PDs: 24
        /dev/sdl        LSI Logic         HDD  900gb slot:  0  exp:  0
        /dev/sdn        LSI Logic         HDD  900gb slot:  1  exp:  0
        /dev/sdah       LSI Logic         HDD  900gb slot:  2  exp:  0
        /dev/sdai       LSI Logic         HDD  900gb slot:  3  exp:  0
        /dev/sdaj       LSI Logic         HDD  900gb slot:  4  exp:  0
        /dev/sdak       LSI Logic         HDD  900gb slot:  5  exp:  0
        /dev/sdal       LSI Logic         HDD  900gb slot:  6  exp:  0
        /dev/sdam       LSI Logic         HDD  900gb slot:  7  exp:  0
        /dev/sdan       LSI Logic         HDD  900gb slot:  8  exp:  0
        /dev/sdao       LSI Logic         HDD  900gb slot:  9  exp:  0
        /dev/sdap       LSI Logic         HDD  900gb slot: 10  exp:  0
        /dev/sdaq       LSI Logic         HDD  900gb slot: 11  exp:  0
        /dev/sdar       LSI Logic         HDD  900gb slot: 12  exp:  0
        /dev/sdaa       LSI Logic         HDD  900gb slot: 13  exp:  0
        /dev/sdab       LSI Logic         HDD  900gb slot: 14  exp:  0
        /dev/sdac       LSI Logic         HDD  900gb slot: 15  exp:  0
        /dev/sdad       LSI Logic         HDD  900gb slot: 16  exp:  0
        /dev/sdae       LSI Logic         HDD  900gb slot: 17  exp:  0
        /dev/sdaf       LSI Logic         HDD  900gb slot: 18  exp:  0
        /dev/sdag       LSI Logic         HDD  900gb slot: 19  exp:  0
        /dev/sda        LSI Logic         SSD  200gb slot: 20  exp:  0
        /dev/sdb        LSI Logic         SSD  200gb slot: 21  exp:  0
        /dev/sdc        LSI Logic         SSD  200gb slot: 22  exp:  0
        /dev/sdd        LSI Logic         SSD  200gb slot: 23  exp:  0
==== END STORAGE DUMP =========
  • Execute the following command to monitor Shared Disk Status

[root@odanoden1 ~]# oakcli show disk
        NAME            PATH            TYPE            STATE           STATE_DETAILS

         e0_pd_00        /dev/sdl        HDD             ONLINE          Good
        e0_pd_01        /dev/sdn        HDD             ONLINE          Good
        e0_pd_02        /dev/sdah       HDD             ONLINE          Good
        e0_pd_03        /dev/sdai       HDD             ONLINE          Good
        e0_pd_04        /dev/sdaj       HDD             ONLINE          Good
        e0_pd_05        /dev/sdak       HDD             ONLINE          Good
        e0_pd_06        /dev/sdal       HDD             ONLINE          Good
        e0_pd_07        /dev/sdam       HDD             ONLINE          Good
        e0_pd_08        /dev/sdan       HDD             ONLINE          Good
        e0_pd_09        /dev/sdao       HDD             ONLINE          Good
        e0_pd_10        /dev/sdap       HDD             ONLINE          Good
        e0_pd_11        /dev/sdaq       HDD             ONLINE          Good
        e0_pd_12        /dev/sdar       HDD             ONLINE          Good
        e0_pd_13        /dev/sdaa       HDD             ONLINE          Good
        e0_pd_14        /dev/sdab       HDD             ONLINE          Good
        e0_pd_15        /dev/sdac       HDD             ONLINE          Good
        e0_pd_16        /dev/sdad       HDD             ONLINE          Good
        e0_pd_17        /dev/sdae       HDD             ONLINE          Good
        e0_pd_18        /dev/sdaf       HDD             ONLINE          Good
        e0_pd_19        /dev/sdag       HDD             ONLINE          Good
        e0_pd_20        /dev/sda        SSD             ONLINE          Good
        e0_pd_21        /dev/sdb        SSD             ONLINE          Good
        e0_pd_22        /dev/sdc        SSD             ONLINE          Good
        e0_pd_23        /dev/sdd        SSD             ONLINE          Good
  • Execute the following command to monitor ODA server enclosure

[root@odanoden1 ~]# oakcli show enclosure

         NAME        SUBSYSTEM         STATUS      METRIC

         E0_FAN0     Cooling           OK          3450 rpm
        E0_FAN1     Cooling           OK          3070 rpm
        E0_FAN2     Cooling           OK          3070 rpm
        E0_FAN3     Cooling           OK          3070 rpm
        E0_IOM0     Encl_Electronics  OK          –
        E0_IOM1     Encl_Electronics  OK          –
        E0_PSU0     Power_Supply      OK          –
        E0_PSU1     Power_Supply      OK          –
        E0_TEMP0    Amb_Temp          OK          19 C
        E0_TEMP1    Midplane_Temp     OK          27 C
        E0_TEMP2    PCM0_Inlet_Temp   OK          32 C
        E0_TEMP3    PCM0_Hotspot_Temp OK          38 C
        E0_TEMP4    PCM1_Inlet_Temp   OK          27 C
        E0_TEMP5    PCM1_Hotspot_Temp OK          36 C
        E0_TEMP6    IOM0_Temp         OK          38 C
        E0_TEMP7    IOM1_Temp         OK          45 C
Using ILOM CLI to Get the Hardware Status
  • Execute the following command to connect to ILOM and monitor Hardware Status

[root@odanoden2 ~]# ssh odanoden2-ilom
Password:

 Oracle(R) Integrated Lights Out Manager

 Version 3.2.8.25 r114493

 Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.

 Warning: password is set to factory default.

 Warning: HTTPS certificate is set to factory default.

 Hostname: odanoden2-ilom

 -> show -level all -output table /SP/faultmgmt
Target                          | Property                             | Value
——————————–+————————————–+———————————————————

 -> show -l all /SYS type==’Hard Disk’

  /SYS/DBP0/HDD0
    Targets:
        OK2RM
        PRSNT
        SERVICE
        STATE

     Properties:
        type = Hard Disk
        ipmi_name = HDD0

     Commands:
        cd
        show

  /SYS/DBP0/HDD1
    Targets:
        OK2RM
        PRSNT
        SERVICE
        STATE

     Properties:
        type = Hard Disk
        ipmi_name = HDD1

     Commands:
        cd
        show
Using ILOM GUI to Get the Hardware Status



Conclusion

 In this article we have learned how to monitor various hardware components status on ODA nodes using oakcli and ILOM. ODA server comes with different hardware components and monitoring them is key for ODA availability.

2

Rename Oracle ASM Disk Group On Exadata

By on

June 5, 2018

- Uncategorized

When Oracle ACS build Exadata Database Machine, they use the OEDA file that you sent them over for Exadata Install. The Exadata is built with default ASM Disk Group name DATAC1, RECOC1 & DBFS_DG. If you want to rename the DATAC1 and RECOC1 to something different to match your Organization standards you can do that by using the Oracle renamedg utility. The number Database version required to rename an ASM Disk Group is 11.2.

 In this article we will demonstrate how to rename ASM Disk Group on Exadata Database Machine running Oracle Database 11.2

 Here we want to change the following ASM Disk Group Names:
DATAC1 to DATA
RECOC1 to RECO

 Steps to rename ASM Disk Group
  • Get the Database version

ORACLE_SID = [+ASM1] ? dbm011
The Oracle base remains unchanged with value /u01/app/oracle

 [oracle@dm01db01 ~]$ sqlplus / as sysdba

 SQL*Plus: Release 11.2.0.4.0 Production on Thu May 24 16:36:34 2018
Copyright (c) 1982, 2013, Oracle.  All rights reserved.

 Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options

 SQL> select * from v$version;

 BANNER
——————————————————————————–
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
PL/SQL Release 11.2.0.4.0 – Production
CORE    11.2.0.4.0      Production
TNS for Linux: Version 11.2.0.4.0 – Production
NLSRTL Version 11.2.0.4.0 – Production

  • Connect to asmcmd and make a note of the Disk Group Names

[oracle@dm01db01 ~]$ . oraenv

 ORACLE_SID = [oracle] ? +ASM1
The Oracle base has been set to /u01/app/oracle

 [oracle@dm01db01 ~]$ asmcmd -p

 ASMCMD [+] > lsdg
State    Type    Rebal  Sector  Block       AU   Total_MB    Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH    N         512   4096  4194304  272154624  271558968          6479872        88359698              0             N  DATAC1/
MOUNTED  HIGH    N         512   4096  4194304    2404640    2402468            68704          777921              0             Y  DBFS_DG/
MOUNTED  NORMAL  N         512   4096  4194304   45389568   45386648           540352        22423148              0             N  RECOC1/

  • Check the versions

ASMCMD [+] > lsct
DB_Name  Status     Software_Version  Compatible_version  Instance_Name  Disk_Group
+ASM     CONNECTED        11.2.0.4.0          11.2.0.4.0  +ASM1          DBFS_DG
DBM01    CONNECTED        11.2.0.4.0          11.2.0.4.0  dbm011         DATAC1

  • Check the database status

[oracle@dm01db01 ~]$ srvctl status database -d dbm01
Instance dbm011 is running on node dm01db01
Instance dbm012 is running on node dm01db02
Instance dbm013 is running on node dm01db03
Instance dbm014 is running on node dm01db04

  • Make a note of the control files, Datafiles, Redo logfiles before stopping the database.

SQL> select name from v$controlfile;
SQL> select name from v$datafile;
SQL> select member from v$logfile;
SQL> select * from v$block_change_tracking;

  • Stop database database

[oracle@dm01db01 ~]$ srvctl stop database -d dbm01

 [oracle@dm01db01 ~]$ srvctl status database -d dbm01
Instance dbm011 is not running on node dm01db01
Instance dbm012 is not running on node dm01db02
Instance dbm013 is not running on node dm01db03
Instance dbm014 is not running on node dm01db04

  • Umount the ASM disk group(s) that you want to rename. Connect to ASM command prompt and umount the disk group. umount the disk group from all nodes.

ASMCMD [+] > umount DATAC1

 ASMCMD [+] > umount RECOC1

 ASMCMD [+] > lsdg
State    Type  Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH  N         512   4096  4194304   2404640  2402468            68704          777921              0             Y  DBFS_DG/

 Note: If you don’t stop the databases using ASM disk group you will get the following error message:

 ASMCMD [+] > umount DATAC1
ORA-15032: not all alterations performed
ORA-15027: active use of diskgroup “DATAC1” precludes its dismount (DBD ERROR: OCIStmtExecute)

 *** Repeat the above steps on all the remaining nodes in the Cluster***

 [oracle@dm01db01 ~]$ ssh dm01db02
Last login: Thu May 17 15:23:31 2018 from dm01db01

 [oracle@dm01db02 ~]$ . oraenv
ORACLE_SID = [oracle] ? +ASM2
The Oracle base has been set to /u01/app/oracle

 [oracle@dm01db02 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Block       AU   Total_MB    Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH    N         512   4096  4194304  272154624  271558968          6479872        88359698              0             N  DATAC1/
MOUNTED  HIGH    N         512   4096  4194304    2404640    2402468            68704          777921              0             Y  DBFS_DG/
MOUNTED  NORMAL  N         512   4096  4194304   45389568   45385040           540352        22422344              0             N  RECOC1/

 [oracle@dm01db02 ~]$ asmcmd umount DATAC1

 [oracle@dm01db02 ~]$ asmcmd umount RECOC1

 [oracle@dm01db02 ~]$ asmcmd lsdg
State    Type  Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH  N         512   4096  4194304   2404640  2402468            68704          777921              0             Y  DBFS_DG/

 [oracle@dm01db01 ~]$ ssh dm01db03
Last login: Thu May 17 15:23:31 2018 from dm01db01

 [oracle@dm01db03 ~]$ . oraenv
ORACLE_SID = [oracle] ? +ASM3
The Oracle base has been set to /u01/app/oracle

 [oracle@dm01db03 ~]$ asmcmd umount DATAC1

 [oracle@dm01db03 ~]$ asmcmd umount RECOC1

 [oracle@dm01db03 ~]$ asmcmd lsdg
State    Type  Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH  N         512   4096  4194304   2404640  2402468            68704          777921              0             Y  DBFS_DG/

 [oracle@dm01db01 ~]$ ssh dm01db04
Last login: Thu May 17 15:23:31 2018 from dm01db01

 [oracle@dm01db04 ~]$ . oraenv
ORACLE_SID = [oracle] ? +ASM4
The Oracle base has been set to /u01/app/oracle

 [oracle@dm01db04 ~]$ asmcmd umount DATAC1

 [oracle@dm01db04 ~]$ asmcmd umount RECOC1

 [oracle@dm01db04 ~]$ asmcmd lsdg
State    Type  Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH  N         512   4096  4194304   2404640  2402468            68704          777921              0             Y  DBFS_DG/

  • Verify that renamedg is in PATH

[oracle@dm01db01 ~]$ which renamedg
/u01/app/11.2.0.4/grid/bin/renamedg

  • As owner of the Grid Infrastruture software execute the renamdg command. Here the owner of GI home is ‘oracle’ user. First I am renaming DATAC1 disk group to DATA

[oracle@dm01db01 ~]$ renamedg phase=both dgname=DATAC1 newdgname=DATA verbose=true

 NOTE: No asm libraries found in the system
Parsing parameters..
Parameters in effect:

          Old DG name       : DATAC1
         New DG name       : DATA
         Phases            :
                 Phase 1
                 Phase 2
         Discovery str      : (null)
         Clean              : TRUE
         Raw only           : TRUE
renamedg operation: phase=both dgname=DATAC1 newdgname=DATA verbose=true
Executing phase 1
Discovering the group
Performing discovery with string:
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_02_dm01cel01 with disk number:74 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_11_dm01cel01 with disk number:83 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_07_dm01cel01 with disk number:79 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_04_dm01cel01 with disk number:76 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_05_dm01cel01 with disk number:77 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_10_dm01cel01 with disk number:82 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_06_dm01cel01 with disk number:78 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_03_dm01cel01 with disk number:75 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_00_dm01cel01 with disk number:72 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_08_dm01cel01 with disk number:80 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_01_dm01cel01 with disk number:73 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_09_dm01cel01 with disk number:81 and timestamp (33068591 612262912)
…
…
…
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_09_dm01cel07 with disk number:69 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_03_dm01cel07 with disk number:63 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_06_dm01cel07 with disk number:66 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_08_dm01cel07 with disk number:68 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_04_dm01cel07 with disk number:64 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_07_dm01cel07 with disk number:67 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_01_dm01cel07 with disk number:61 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_05_dm01cel07 with disk number:65 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_02_dm01cel07 with disk number:62 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_00_dm01cel07 with disk number:60 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_11_dm01cel07 with disk number:71 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_10_dm01cel07 with disk number:70 and timestamp (33068591 612262912)
Checking for hearbeat…
Re-discovering the group
Performing discovery with string:
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_02_dm01cel01 with disk number:74 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_11_dm01cel01 with disk number:83 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_07_dm01cel01 with disk number:79 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_04_dm01cel01 with disk number:76 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_05_dm01cel01 with disk number:77 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_10_dm01cel01 with disk number:82 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_06_dm01cel01 with disk number:78 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_03_dm01cel01 with disk number:75 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_00_dm01cel01 with disk number:72 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_08_dm01cel01 with disk number:80 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_01_dm01cel01 with disk number:73 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.9;192.168.10.10/DATAC1_CD_09_dm01cel01 with disk number:81 and timestamp (33068591 612262912)
…
…
…
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_09_dm01cel07 with disk number:69 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_03_dm01cel07 with disk number:63 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_06_dm01cel07 with disk number:66 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_08_dm01cel07 with disk number:68 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_04_dm01cel07 with disk number:64 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_07_dm01cel07 with disk number:67 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_01_dm01cel07 with disk number:61 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_05_dm01cel07 with disk number:65 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_02_dm01cel07 with disk number:62 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_00_dm01cel07 with disk number:60 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_11_dm01cel07 with disk number:71 and timestamp (33068591 612262912)
Identified disk OSS::o/192.168.10.21;192.168.10.22/DATAC1_CD_10_dm01cel07 with disk number:70 and timestamp (33068591 612262912)
Checking if the diskgroup is mounted or used by CSS
Checking disk number:74
Checking disk number:83
Checking disk number:79
Checking disk number:76
Checking disk number:77
Checking disk number:82
Checking disk number:78
Checking disk number:75
Checking disk number:72
Checking disk number:80
Checking disk number:73
Checking disk number:81
Checking disk number:69
Checking disk number:63
Checking disk number:66
Checking disk number:68
Checking disk number:64
Checking disk number:67
Checking disk number:61
Checking disk number:65
Checking disk number:62
Checking disk number:60
…
…
Generating configuration file..
Completed phase 1
Executing phase 2
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_02_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_11_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_07_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_04_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_05_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_10_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_06_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_03_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_00_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_08_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/DATAC1_CD_01_dm01cel01
Modifying the header
…
…
Modifying the header
Completed phase 2
Terminating kgfd context 0x7f9d346240a0

  • Now rename RECOC1 ASM disk group to RECO using renamdg command

[oracle@dm01db01 ~]$ renamedg phase=both dgname=RECOC1 newdgname=RECO verbose=true

 NOTE: No asm libraries found in the system
Parsing parameters..
Parameters in effect:

          Old DG name       : RECOC1
         New DG name       : RECO
         Phases            :
                 Phase 1
                 Phase 2
         Discovery str      : (null)
         Clean              : TRUE
         Raw only           : TRUE
renamedg operation: phase=both dgname=RECOC1 newdgname=RECO verbose=true
Executing phase 1
Discovering the group
Performing discovery with string:
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_03_dm01cel01 with disk number:75 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_04_dm01cel01 with disk number:76 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_05_dm01cel01 with disk number:77 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_00_dm01cel01 with disk number:72 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_10_dm01cel01 with disk number:82 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_07_dm01cel01 with disk number:79 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_02_dm01cel01 with disk number:74 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_01_dm01cel01 with disk number:73 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_11_dm01cel01 with disk number:83 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_08_dm01cel01 with disk number:80 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_09_dm01cel01 with disk number:81 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_06_dm01cel01 with disk number:78 and timestamp (33068591 628813824)
…
…
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_01_dm01cel07 with disk number:61 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_08_dm01cel07 with disk number:68 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_06_dm01cel07 with disk number:66 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_11_dm01cel07 with disk number:71 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_10_dm01cel07 with disk number:70 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_05_dm01cel07 with disk number:65 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_00_dm01cel07 with disk number:60 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_03_dm01cel07 with disk number:63 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_09_dm01cel07 with disk number:69 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_07_dm01cel07 with disk number:67 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_02_dm01cel07 with disk number:62 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_04_dm01cel07 with disk number:64 and timestamp (33068591 628813824)
Checking for hearbeat…
Re-discovering the group
Performing discovery with string:
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_03_dm01cel01 with disk number:75 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_04_dm01cel01 with disk number:76 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_05_dm01cel01 with disk number:77 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_00_dm01cel01 with disk number:72 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_10_dm01cel01 with disk number:82 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_07_dm01cel01 with disk number:79 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_02_dm01cel01 with disk number:74 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_01_dm01cel01 with disk number:73 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_11_dm01cel01 with disk number:83 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_08_dm01cel01 with disk number:80 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_09_dm01cel01 with disk number:81 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.9;192.168.10.10/RECOC1_CD_06_dm01cel01 with disk number:78 and timestamp (33068591 628813824)
…
…
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_01_dm01cel07 with disk number:61 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_08_dm01cel07 with disk number:68 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_06_dm01cel07 with disk number:66 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_11_dm01cel07 with disk number:71 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_10_dm01cel07 with disk number:70 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_05_dm01cel07 with disk number:65 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_00_dm01cel07 with disk number:60 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_03_dm01cel07 with disk number:63 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_09_dm01cel07 with disk number:69 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_07_dm01cel07 with disk number:67 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_02_dm01cel07 with disk number:62 and timestamp (33068591 628813824)
Identified disk OSS::o/192.168.10.21;192.168.10.22/RECOC1_CD_04_dm01cel07 with disk number:64 and timestamp (33068591 628813824)
…
…
Checking if the diskgroup is mounted or used by CSS
Checking disk number:75
Checking disk number:76
Checking disk number:77
Checking disk number:72
Checking disk number:82
Checking disk number:79
Checking disk number:74
Checking disk number:73
Checking disk number:83
Checking disk number:80
Checking disk number:81
Checking disk number:78
Checking disk number:61
Checking disk number:68
Checking disk number:66
Checking disk number:71
Checking disk number:70
Checking disk number:65
Checking disk number:60
Checking disk number:63
Checking disk number:69
Checking disk number:67
Checking disk number:62
Checking disk number:64
Checking disk number:49
…
…
Generating configuration file..
Completed phase 1
Executing phase 2
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_03_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_04_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_05_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_00_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_10_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_07_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_02_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_01_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_11_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_08_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_09_dm01cel01
Modifying the header
Looking for o/192.168.10.9;192.168.10.10/RECOC1_CD_06_dm01cel01
Modifying the header
…
…
Modifying the header
Completed phase 2
Terminating kgfd context 0x7f8d42f6c0a0

  • Mount the DATA and RECO ASM disk groups on all the nodes.

[oracle@dm01db01 ~]$ asmcmd -p

 ASMCMD [+] > lsdg
State    Type  Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH  N         512   4096  4194304   2404640  2402468            68704          777921              0             Y  DBFS_DG/

 ASMCMD [+] > mount DATA

 ASMCMD [+] > mount RECO

 ASMCMD [+] > lsdg
State    Type    Rebal  Sector  Block       AU   Total_MB    Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH    N         512   4096  4194304  272154624  271558968          6479872        88359698              0             N  DATA/
MOUNTED  HIGH    N         512   4096  4194304    2404640    2402468            68704          777921              0             Y  DBFS_DG/
MOUNTED  NORMAL  N         512   4096  4194304   45389568   45385040           540352        22422344              0             N  RECO/

 *** Repeat the above steps on all the remaning compute nodes in the Cluster***

 Note: 

  • renamedg utility cannot rename the associated ASM/Grid disk disk name
  • renamedg utility cannot rename/update the control files, datafiles, redo log files and any other files that reference ASM DG for all databases


 Steps to rename control files, datafiles, redo log files and other database files
  • Update SPFILE location

[oracle@dm01db01 ~]$ cd $ORACLE_HOME/dbs

 [oracle@dm01db01 dbs]$ cat initdbm011.ora
SPFILE=’+DATAC1/dbm01/spfiledbm01.ora’

 [oracle@dm01db01 dbs]$ vi initdbm011.ora

 [oracle@dm01db01 dbs]$ cat initdbm011.ora
SPFILE=’+DATA/dbm01/spfiledbm01.ora’

 [oracle@dm01db01 dbs]$ scp initdbm011.ora dm01db02:/u01/app/oracle/product/11.2.0.4/dbhome/dbs/initdbm012.ora
initdbm011.ora                                                                                                                                             100%   42     0.0KB/s   00:00

 [oracle@dm01db01 dbs]$ scp initdbm011.ora dm01db03:/u01/app/oracle/product/11.2.0.4/dbhome/dbs/initdbm013.ora
initdbm011.ora                                                                                                                                             100%   42     0.0KB/s   00:00

 [oracle@dm01db01 dbs]$ scp initdbm011.ora dm01db04:/u01/app/oracle/product/11.2.0.4/dbhome/dbs/initdbm014.ora
initdbm011.ora                                                                                                                                             100%   42     0.0KB/s   00:00

  • Update control file location

[oracle@dm01db01 dbs]$ . oraenv
ORACLE_SID = [dbm011] ?
The Oracle base remains unchanged with value /u01/app/oracle

 [oracle@dm01db01 dbs]$ sqlplus / as sysdba

 SQL*Plus: Release 11.2.0.4.0 Production on Fri May 25 10:17:49 2018
Copyright (c) 1982, 2013, Oracle.  All rights reserved.
Connected to an idle instance.

 SQL> startup nomount;
ORACLE instance started.

 Total System Global Area 2.5655E+10 bytes
Fixed Size                  2265224 bytes
Variable Size            4160753528 bytes
Database Buffers         2.1341E+10 bytes
Redo Buffers              151113728 bytes

 SQL> show parameter control_files

 NAME                                 TYPE        VALUE
———————————— ———– ——————————
control_files                        string      +DATAC1/dbm01/controlfile/current.256.976374731

 SQL> alter system set control_files=’+DATA/dbm01/controlfile/current.256.976374731′ scope=spfile;

 System altered.

 SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.

 Total System Global Area 2.5655E+10 bytes
Fixed Size                  2265224 bytes
Variable Size            4160753528 bytes
Database Buffers         2.1341E+10 bytes
Redo Buffers              151113728 bytes
Database mounted.

 SQL> select name from v$controlfile;

 NAME
——————————————————————————–
+DATA/dbm01/controlfile/current.256.976374731

  • Update datafile and redo log file locations

SQL> select name from v$datafile;

 NAME
——————————————————————————–
+DATAC1/dbm01/datafile/system.259.976374739
+DATAC1/dbm01/datafile/sysaux.260.976374743
+DATAC1/dbm01/datafile/undotbs1.261.976374745
+DATAC1/dbm01/datafile/undotbs2.263.976374753
+DATAC1/dbm01/datafile/undotbs3.264.976374755
+DATAC1/dbm01/datafile/undotbs4.265.976374757
+DATAC1/dbm01/datafile/users.266.976374757

 7 rows selected.

 SQL> select member from v$logfile;

 MEMBER
——————————————————————————–
+DATAC1/dbm01/onlinelog/group_1.257.976374733
+DATAC1/dbm01/onlinelog/group_2.258.976374735
+DATAC1/dbm01/onlinelog/group_7.267.976375073
+DATAC1/dbm01/onlinelog/group_8.268.976375075
+DATAC1/dbm01/onlinelog/group_5.269.976375079
+DATAC1/dbm01/onlinelog/group_6.270.976375083
+DATAC1/dbm01/onlinelog/group_3.271.976375085
+DATAC1/dbm01/onlinelog/group_4.272.976375087
+DATAC1/dbm01/onlinelog/group_9.274.976375205
+DATAC1/dbm01/onlinelog/group_10.275.976375209
+DATAC1/dbm01/onlinelog/group_11.276.976375211
+DATAC1/dbm01/onlinelog/group_12.277.976375215
+DATAC1/dbm01/onlinelog/group_13.278.976375217
+DATAC1/dbm01/onlinelog/group_14.279.976375219
+DATAC1/dbm01/onlinelog/group_15.280.976375223
+DATAC1/dbm01/onlinelog/group_16.281.976375225

 16 rows selected.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/system.259.976374739’ to ‘+DATA/dbm01/datafile/system.259.976374739’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/sysaux.260.976374743’ to ‘+DATA/dbm01/datafile/sysaux.260.976374743’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/undotbs1.261.976374745’ to ‘+DATA/dbm01/datafile/undotbs1.261.976374745’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/undotbs2.263.976374753’ to ‘+DATA/dbm01/datafile/undotbs2.263.976374753’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/undotbs3.264.976374755’ to ‘+DATA/dbm01/datafile/undotbs3.264.976374755’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/undotbs4.265.976374757’ to ‘+DATA/dbm01/datafile/undotbs4.265.976374757’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/datafile/users.266.976374757’ to ‘+DATA/dbm01/datafile/users.266.976374757’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_1.257.976374733’  to ‘+DATA/dbm01/onlinelog/group_1.257.976374733’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_2.258.976374735’  to ‘+DATA/dbm01/onlinelog/group_2.258.976374735’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_7.267.976375073’  to ‘+DATA/dbm01/onlinelog/group_7.267.976375073’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_8.268.976375075’  to ‘+DATA/dbm01/onlinelog/group_8.268.976375075’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_5.269.976375079’  to ‘+DATA/dbm01/onlinelog/group_5.269.976375079’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_6.270.976375083’  to ‘+DATA/dbm01/onlinelog/group_6.270.976375083’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_3.271.976375085’  to ‘+DATA/dbm01/onlinelog/group_3.271.976375085’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_4.272.976375087’  to ‘+DATA/dbm01/onlinelog/group_4.272.976375087’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_9.274.976375205’  to ‘+DATA/dbm01/onlinelog/group_9.274.976375205’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_10.275.976375209’ to ‘+DATA/dbm01/onlinelog/group_10.275.976375209’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_11.276.976375211’ to ‘+DATA/dbm01/onlinelog/group_11.276.976375211’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_12.277.976375215’ to ‘+DATA/dbm01/onlinelog/group_12.277.976375215’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_13.278.976375217’ to ‘+DATA/dbm01/onlinelog/group_13.278.976375217’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_14.279.976375219’ to ‘+DATA/dbm01/onlinelog/group_14.279.976375219’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_15.280.976375223’ to ‘+DATA/dbm01/onlinelog/group_15.280.976375223’;

 Database altered.

 SQL> alter database rename file ‘+DATAC1/dbm01/onlinelog/group_16.281.976375225’ to ‘+DATA/dbm01/onlinelog/group_16.281.976375225’;

 Database altered.

  • Verify the datafiles and redo log files names

SQL> select name from v$datafile;

 NAME
——————————————————————————–
+DATA/dbm01/datafile/system.259.976374739
+DATA/dbm01/datafile/sysaux.260.976374743
+DATA/dbm01/datafile/undotbs1.261.976374745
+DATA/dbm01/datafile/undotbs2.263.976374753
+DATA/dbm01/datafile/undotbs3.264.976374755
+DATA/dbm01/datafile/undotbs4.265.976374757
+DATA/dbm01/datafile/users.266.976374757

 7 rows selected.

 SQL> select member from v$logfile;

 MEMBER
——————————————————————————–
+DATA/dbm01/onlinelog/group_1.257.976374733
+DATA/dbm01/onlinelog/group_2.258.976374735
+DATA/dbm01/onlinelog/group_7.267.976375073
+DATA/dbm01/onlinelog/group_8.268.976375075
+DATA/dbm01/onlinelog/group_5.269.976375079
+DATA/dbm01/onlinelog/group_6.270.976375083
+DATA/dbm01/onlinelog/group_3.271.976375085
+DATA/dbm01/onlinelog/group_4.272.976375087
+DATA/dbm01/onlinelog/group_9.274.976375205
+DATA/dbm01/onlinelog/group_10.275.976375209
+DATA/dbm01/onlinelog/group_11.276.976375211
+DATA/dbm01/onlinelog/group_12.277.976375215
+DATA/dbm01/onlinelog/group_13.278.976375217
+DATA/dbm01/onlinelog/group_14.279.976375219
+DATA/dbm01/onlinelog/group_15.280.976375223
+DATA/dbm01/onlinelog/group_16.281.976375225

 16 rows selected.

  • Update block change tracking file location

SQL> alter database rename file ‘+DATAC1/dbm01/changetracking/ctf.282.976375227’ to ‘+DATA/dbm01/changetracking/ctf.282.976375227’;

 Database altered.

 SQL> select * from v$block_change_tracking;

 STATUS
———-
FILENAME
——————————————————————————–
     BYTES
———-
ENABLED
+DATA/dbm01/changetracking/ctf.282.976375227
  11599872

  • Update OMF related parameters

SQL> show parameter db_create_online_log_dest_1

 NAME                                 TYPE        VALUE
———————————— ———– ——————————
db_create_online_log_dest_1          string      +DATAC1

 SQL> alter system set db_create_online_log_dest_1=’+DATA’;

 System altered.

 SQL> show parameter db_create_online_log_dest_1

 NAME                                 TYPE        VALUE
———————————— ———– ——————————
db_create_online_log_dest_1          string      +DATA

  • Update Fast Recovery Area location

SQL> show parameter db_recovery_file_dest

 NAME                                 TYPE        VALUE
———————————— ———– ——————————
db_recovery_file_dest                string      +RECOC1
db_recovery_file_dest_size           big integer 20425000M

 SQL> alter system set db_recovery_file_dest=’+RECO’;

 System altered.

 SQL> show parameter db_recovery_file_dest

 NAME                                 TYPE        VALUE
———————————— ———– ——————————
db_recovery_file_dest                string      +RECO
db_recovery_file_dest_size           big integer 20425000M

  • Shutdown the database

SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit

  • Update the database configuration

[oracle@dm01db01 dbs]$ srvctl config database -d dbm01
Database unique name: dbm01
Database name: dbm01
Oracle home: /u01/app/oracle/product/11.2.0.4/dbhome
Oracle user: oracle
Spfile: +DATAC1/dbm01/spfiledbm01.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: dbm01
Database instances: dbm011,dbm012,dbm013,dbm014
Disk Groups: DATAC1,RECOC1,DATA
Mount point paths:
Services:
Type: RAC
Database is administrator managed

 [oracle@dm01db01 dbs]$ srvctl modify database -p +DATA/dbm01/spfiledbm01.ora -a DATA,RECO -d dbm01

 [oracle@dm01db01 dbs]$ srvctl config database -d dbm01
Database unique name: dbm01
Database name: dbm01
Oracle home: /u01/app/oracle/product/11.2.0.4/dbhome
Oracle user: oracle
Spfile: +DATA/dbm01/spfiledbm01.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: dbm01
Database instances: dbm011,dbm012,dbm013,dbm014
Disk Groups: DATA,RECO
Mount point paths:
Services:
Type: RAC
Database is administrator managed

  • Start the database and verify

[oracle@dm01db01 dbs]$ srvctl start database -d dbm01

 [oracle@dm01db01 dbs]$ srvctl status database -d dbm01
Instance dbm011 is running on node dm01db01
Instance dbm012 is running on node dm01db02
Instance dbm013 is running on node dm01db03
Instance dbm014 is running on node dm01db04

 [oracle@dm01db01 dbs]$ sqlplus / as sysdba

 SQL*Plus: Release 11.2.0.4.0 Production on Fri May 25 10:40:34 2018
Copyright (c) 1982, 2013, Oracle.  All rights reserved.

 Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options

 SQL> select name, open_mode,database_role from gv$database;

 NAME      OPEN_MODE            DATABASE_ROLE
——— ——————– —————-
DBM01     READ WRITE           PRIMARY
DBM01     READ WRITE           PRIMARY
DBM01     READ WRITE           PRIMARY
DBM01     READ WRITE           PRIMARY

 ORACLE_SID = [+ASM1] ? dbm011
The Oracle base remains unchanged with value /u01/app/oracle

 [oracle@dm01db01 ~]$ sqlplus / as sysdba

 SQL*Plus: Release 11.2.0.4.0 Production on Thu May 24 16:36:34 2018
Copyright (c) 1982, 2013, Oracle.  All rights reserved.

 Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options

 SQL> select * from v$version;

 BANNER
——————————————————————————–
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
PL/SQL Release 11.2.0.4.0 – Production
CORE    11.2.0.4.0      Production
TNS for Linux: Version 11.2.0.4.0 – Production
NLSRTL Version 11.2.0.4.0 – Production
[oracle@dm01db01 ~]$ . oraenv

 ORACLE_SID = [oracle] ? +ASM1
The Oracle base has been set to /u01/app/oracle

 [oracle@dm01db01 ~]$ asmcmd -p

 ASMCMD [+] > lsdg
State    Type    Rebal  Sector  Block       AU   Total_MB    Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  HIGH    N         512   4096  4194304  272154624  271558968          6479872        88359698              0             N  DATAC1/
MOUNTED  HIGH    N         512   4096  4194304    2404640    2402468            68704          777921              0             Y  DBFS_DG/
MOUNTED  NORMAL  N         512   4096  4194304   45389568   45386648           540352        22423148              0             N  RECOC1/

 ASMCMD [+] > lsct
DB_Name  Status     Software_Version  Compatible_version  Instance_Name  Disk_Group
+ASM     CONNECTED        11.2.0.4.0          11.2.0.4.0  +ASM1          DBFS_DG
DBM01    CONNECTED        11.2.0.4.0          11.2.0.4.0  dbm011         DATAC1

 [oracle@dm01db01 ~]$ srvctl status database -d dbm01
Instance dbm011 is running on node dm01db01
Instance dbm012 is running on node dm01db02
Instance dbm013 is running on node dm01db03
Instance dbm014 is running on node dm01db04
Conclusion

 In this article we have learned how to rename an ASM Disk group on Exadata running Oracle Database 11.2. Starting with Oracle Database 11.2 you can use the renamedg command to rename an ASM Disk Group. renamedg utility cannot rename the associated ASM/Grid disk disk name. Also renamedg cannot rename/update the control files, datafiles, redo log files and any other files that reference ASM DG for all databases. You must update database files manually after renaming ASM disk groups.

0

ABOUT US

Netsoftmate is an Oracle Gold Partner and an expert service provider for Oracle Engineered Systems, Databases and Cyber Security. We are headquartered in India with offices spread across North America, Middle-east and SEA.

Know More

Privacy Policy | Terms & Conditions

 

CONTACT US

India
Address: Hyderabad, Telangana-500052
Phone: +91 965 246 5533
Phone: +91 988 534 4596

United States
Address: 228 Bagatelle Road, Melville, NY 11747
Phone: +1 512 808 5399

Middle East
KSA Address: Dabbad Streest, Riyadh, Saudi Arabia
Phone: +966 54 602 9364
UAE Address: Nad Al Sheba, Dubai, U.A.E
Phone: +971 52 849 3496